How to Remove Plastic Edging Strips from Chinese Furniture385

Plastic edging strips are commonly used on Chinese furniture to protect the edges of the wood from damage. However, over time, these strips can become loose or damaged and need to be replaced. If you are not familiar with the process of removing plastic edging strips, it can be challenging to do it without damaging the furniture.

Here is a step-by-step guide on how to remove plastic edging strips from Chinese furniture:
Gather your tools. You will need a putty knife, a flat-head screwdriver, and a pair of pliers.
Start by prying up the edge of the edging strip with the putty knife. Be careful not to damage the wood underneath.
Once you have a small gap between the edging strip and the wood, insert the flat-head screwdriver into the gap and pry up the edging strip further. Work your way around the entire edge of the furniture, prying up the edging strip as you go.
Use the pliers to grasp the edging strip and pull it away from the wood. Be careful not to pull too hard, as you could damage the wood.
Once the edging strip is removed, clean the surface of the wood with a damp cloth to remove any residual adhesive.

If you are having difficulty removing the plastic edging strips, you can try using a heat gun to soften the adhesive. Be careful not to hold the heat gun too close to the wood, as you could damage it.

Once you have removed the plastic edging strips, you can install new ones. To do this, simply apply a thin layer of adhesive to the back of the new edging strips and press them into place. Be sure to use a clamp to hold the edging strips in place until the adhesive has dried.

Replacing plastic edging strips is a relatively simple task that can be done in a few minutes. By following the steps in this guide, you can easily remove and replace the edging strips on your Chinese furniture.

2025-01-05

Previous：How to Install Aluminum Plastic Panel Edging Strips

Next：What is Square Edging?