How to Install Table Edge Banding208

Step 1: Gather Your Materials

You will need the following materials:
Table edge banding
Iron or heat gun
Edge banding trimmer
Sandpaper or sanding block
Tape measure
Utility knife

Step 2: Cut the Edge Banding

Measure the length of the edge you want to cover and cut the edge banding to size. Make sure the cut is straight and clean.

Step 3: Heat the Edge Banding

Use an iron or heat gun to heat the edge banding. Be careful not to overheat it, as this can damage the banding.

Step 4: Apply the Edge Banding

Apply the heated edge banding to the edge of the table. Use your fingers or a cloth to press the banding into place. Make sure it is flush with the edge of the table.

Step 5: Trim the Edge Banding

Use an edge banding trimmer to trim the excess banding. Be careful not to cut into the table.

Step 6: Sand the Edge Banding

Sand the edge banding to smooth it out. Use a fine-grit sandpaper or sanding block.

Step 7: Clean the Edge Banding

Use a damp cloth to clean the edge banding. This will remove any dust or debris.

Step 8: Enjoy Your New Edge Banding

Your table now has a new, finished look. Enjoy your newly edged table!

Additional Tips
For a stronger bond, you can apply wood glue to the edge of the table before applying the edge banding.
If you are using a heat gun, be sure to hold it at a safe distance from the edge banding. Too much heat can damage the banding.
If you are having trouble getting the edge banding to stick, you can use a hair dryer to heat it up.
Once the edge banding is applied, you can use a utility knife to trim any excess banding.

2025-01-06

Previous：How Much Edge Banding Do You Need for a Wardrobe?

Next：How to Properly Repair Guangzhou Edging Strips