How to Replace Edging Strips on Wooden Panels [Video]305

Are you looking for a way to give your wooden panels a fresh, updated look? Replacing the edging strips is a quick and easy way to do just that. In this video, we'll show you how to remove the old edging strips and install new ones.

Materials you'll need:

* New edging strips
* Adhesive
* Utility knife
* Measuring tape
* Mitre saw
* Sandpaper
* Tack cloth

Instructions:

1. Remove the old edging strips. Use a utility knife to carefully score the adhesive bond between the edging strip and the panel. Then, use a pry bar or chisel to gently pry the edging strip away from the panel. Be careful not to damage the panel.
2. Clean the surface of the panel. Once the old edging strips are removed, clean the surface of the panel with a tack cloth to remove any dust or debris.
3. Measure and cut the new edging strips. Measure the length of the panel and cut the new edging strips to size using a mitre saw. Make sure to cut the strips at a 45-degree angle so that they will fit together seamlessly at the corners.
4. Apply adhesive to the edging strips. Apply a thin layer of adhesive to the back of the edging strips. Make sure to apply the adhesive evenly, so that the edging strips will adhere properly to the panel.
5. Install the new edging strips. Press the edging strips into place on the panel. Make sure to align the strips carefully and press them firmly into place.
6. Wipe away any excess adhesive. Use a damp cloth to wipe away any excess adhesive that may have squeezed out from between the edging strips and the panel.
7. Allow the adhesive to dry. Allow the adhesive to dry completely before using the panel. The drying time will vary depending on the type of adhesive you used.

Tips:

* If you are replacing the edging strips on a large panel, it may be helpful to have someone assist you.
* Be sure to wear gloves when working with adhesive.
* If you make a mistake, don't worry. You can simply remove the edging strip and start over.
* You can use any type of edging strip you like. There are a variety of materials and styles available, so you can choose the ones that best match your décor.

Conclusion:

Replacing the edging strips on wooden panels is a quick and easy way to update the look of your furniture or other wooden items. With a little bit of time and effort, you can give your old panels a fresh, new look.

2025-01-06

---

Previous：No Trim Repair? No Problem: Unlocking the Secrets of Chinese Edge Banding

Next：How to Install Edge Banding Like a Pro