How to Apply Adhesive to Furniture Edging Strips306

Applying adhesive to furniture edging strips is a crucial step in ensuring a strong and long-lasting bond between the strips and the edge of the furniture. Here's a detailed guide on how to properly apply adhesive to furniture edging strips.

Materials Needed* Furniture edging strips
* Contact cement or wood glue
* Adhesive applicator (brush, roller, or spray gun)
* Clean cloths or paper towels
* Safety gloves (optional)

Types of AdhesivesThere are two main types of adhesives used for furniture edging strips: contact cement and wood glue.
* Contact cement forms an instant bond upon contact, eliminating the need for clamping or pressing. It is ideal for edging strips made of materials such as PVC, veneer, and laminate.
* Wood glue provides a longer open time, allowing you to adjust the positioning of the strips before the glue sets. It is suitable for edging strips made of wood or engineered wood products.

Applying Contact CementNote: Contact cement is highly flammable and toxic. Ensure adequate ventilation and wear safety gloves when using it.
1. Apply a thin layer of contact cement to both the edge of the furniture and the back of the edging strip using a brush or roller.
2. Allow the contact cement to dry to the touch, typically within 15-20 minutes.
3. Align the edging strip and press it firmly onto the edge of the furniture. Use a rubber mallet or hand roller to create a strong bond.

Applying Wood Glue1. Apply a thin layer of wood glue to the edge of the furniture using a brush or roller.
2. Place the edging strip on the edge of the furniture and align it properly.
3. Clamp or press the edging strip in place for the amount of time specified by the glue manufacturer. Usually, it takes several hours to fully set.

Important Tips* Ensure the furniture edge and edging strip are clean and free of dust and debris.
* Apply the adhesive evenly and thinly to avoid excess squeeze-out.
* Use a clean cloth or paper towel to wipe away any excess adhesive immediately.
* Allow the adhesive to cure fully before using the furniture.

Troubleshooting Common Adhesive Issues* Edging strip is lifting or peeling: The adhesive may not have been applied properly or the surface was not clean. Reapply the adhesive and ensure a firm bond.
* Excess adhesive squeezing out: Too much adhesive was applied. Wipe away the excess and allow the adhesive to cure before sanding or trimming.
* Adhesive is not sticking: The adhesive may have expired or been diluted. Check the manufacturer's instructions and use fresh adhesive as needed.

2025-01-07

Previous：Can I Return Edge Banding?

Next：How to Replace Cracked Edge Banding on Chinese Furniture