How to Install Wood Door Edge Banding53

Edge banding is a thin strip of material that is applied to the exposed edges of wood doors to provide a finished, durable, and aesthetically pleasing appearance. Installing wood door edge banding is a relatively simple process that can be completed in a few hours with the right tools and materials.

Materials* Wood door edge banding
* Wood glue
* Contact cement
* Utility knife
* Sandpaper
* Router (optional)
* Flush trim bit (optional)
* Clamps

Instructions1. Prepare the door.
* Remove any existing edge banding from the door.
* Clean the edges of the door with a damp cloth to remove any dust or debris.
* Apply a thin layer of wood glue to the edges of the door.
2. Apply the edge banding.
* Cut the edge banding to the desired length.
* Apply a thin layer of contact cement to the back of the edge banding.
* Align the edge banding with the edge of the door and press it into place.
* Use clamps to hold the edge banding in place while the contact cement dries.
3. Trim the edge banding.
* Once the contact cement has dried, use a utility knife to trim the excess edge banding from the edges of the door.
* If desired, you can use a router with a flush trim bit to create a perfectly flush finish.
4. Sand the edge banding.
* Sand the edge banding lightly to smooth any rough edges.
* Use a fine-grit sandpaper to avoid damaging the finish of the door.
5. Apply a finish.
* Apply a clear finish to the edge banding to protect it from moisture and wear.
* Allow the finish to dry completely before using the door.
Tips
* Use a high-quality wood glue and contact cement to ensure a strong bond.
* Apply the contact cement in a thin, even layer to avoid creating lumps or bubbles.
* Use clamps to hold the edge banding in place while the contact cement dries. This will prevent the edge banding from shifting or peeling.
* If you are using a router to trim the edge banding, be sure to use a sharp flush trim bit. A dull bit will tear the edge banding and create a poor finish.
* Sand the edge banding lightly to smooth any rough edges. Avoid sanding too much, as this can damage the finish of the door.
* Apply a clear finish to the edge banding to protect it from moisture and wear. This will help to extend the life of the edge banding.
By following these instructions, you can easily install wood door edge banding to give your doors a finished, durable, and aesthetically pleasing appearance.

2025-01-13

Previous：Can Edge Banding Be Bent?

Next：How to Cut Melamine Edging for Cabinets