How to Replace Edging Strip on Chinese Furniture383

When the edging strip on your Chinese furniture becomes damaged or worn, it can detract from the overall appearance of the piece. Fortunately, replacing the edging strip is a relatively simple task that can be completed in a few hours with the right tools and materials.

Tools and Materials* New edging strip
* Measuring tape
* Utility knife
* Wood glue
* Clamps
* Sandpaper
* Tack cloth

Step-by-Step Instructions1. Measure and Cut the New Edging Strip: Measure the length of the damaged edging strip and cut a new strip to the same length.
2. Remove the Old Edging Strip: Carefully use the utility knife to score the adhesive holding the old edging strip in place. Then, gently pry the strip away from the furniture using the tip of the knife.
3. Clean the Surface: Use a tack cloth to remove any remaining adhesive or dirt from the surface of the furniture where the new edging strip will be applied.
4. Apply Wood Glue: Apply a thin layer of wood glue to the back of the new edging strip.
5. Position the New Edging Strip: Carefully align the new edging strip with the edge of the furniture and press it into place.
6. Clamp the Strip: Use clamps to hold the new edging strip in place while the glue dries. Allow the glue to dry for the amount of time specified on the packaging.
7. Sand and Finish: Once the glue has dried, use sandpaper to smooth out any rough edges or imperfections on the edging strip. You can then apply a finish to match the rest of the furniture, such as varnish or oil.

Tips for Success* Use a sharp utility knife to avoid tearing or damaging the edging strip.
* Apply wood glue evenly to the back of the new edging strip to ensure a strong bond.
* Clamp the edging strip firmly while the glue dries to prevent it from shifting out of place.
* Sand the edging strip lightly to create a smooth finish that matches the rest of the furniture.
* If the edging strip extends beyond the edge of the furniture, you can use a miter saw to cut a 45-degree angle on the end of the strip to create a seamless transition.

2025-01-14

Previous：How to Install Wood Veneer Edge Banding: A Step-by-Step Guide

Next：How to Cut Aluminum Trim for Baseboards