How to Install Tufting Welt Cording123

Tufting welt cording is a type of decorative trim that is used to create a raised edge on upholstered furniture. It is often used on sofas, chairs, and headboards. Welt cording can be made from a variety of materials, including fabric, leather, and vinyl. It is typically installed using a special tool called a welt installer.

Materials* Tufting welt cording
* Fabric scissors
* Welt installer
* Measuring tape
* Pencil or fabric marker

Instructions1. Measure the length of the edge that you want to trim. Cut a piece of welt cording that is the same length.
2. Apply a small amount of adhesive to the back of the welt cording. This will help to keep it in place while you are installing it.
3. Position the welt cording on the edge of the fabric. Make sure that the welt cording is centered on the edge.
4. Insert the welt installer into the welt cording.
5. Squeeze the handles of the welt installer together. This will cause the welt cording to be inserted into the fabric.
6. Continue to squeeze the handles of the welt installer until the welt cording is completely installed.
7. Trim any excess welt cording.

Tips* Use a sharp pair of scissors to cut the welt cording. This will help to prevent fraying.
* Apply the adhesive to the welt cording in a thin, even layer. Too much adhesive can make the welt cording difficult to install.
* Take your time when installing the welt cording. It is important to make sure that the welt cording is installed correctly.
* If you make a mistake, you can remove the welt cording and start over.

ConclusionTufting welt cording is a great way to add a touch of style to your upholstered furniture. It is relatively easy to install and can be done in a matter of minutes.

2025-01-15

Previous：Why Does My Edge Banding Have White Pin Dots?

Next：How to Repair Damaged Veneer Edges on Wood Doors