How to Install Wood Veneer Edge Banding331

Wood veneer edge banding is a thin strip of wood that is applied to the edges of plywood, MDF, or other wood substrates to create a finished look. It is a cost-effective way to add a touch of elegance to your furniture or other woodworking projects.

Installing wood veneer edge banding is a relatively simple process, but there are a few things you need to know to do it properly. In this article, we will walk you through the steps on how to install wood veneer edge banding.

Materials You Will Need* Wood veneer edge banding
* Contact cement
* A roller or brayer
* A sharp utility knife
* A sanding block
* A tack cloth

Step 1: Prepare the Edges* The first step is to prepare the edges of the substrate that you will be applying the edge banding to. This means making sure that the edges are clean, smooth, and free of any dust or debris.
* If the edges are not smooth, you can use a sanding block to sand them down until they are. Once the edges are prepared, you can apply the contact cement.

Step 2: Apply the Contact Cement* Contact cement is a type of adhesive that is used to bond two surfaces together. It is important to apply the contact cement evenly to both the edge of the substrate and the back of the edge banding.
* To apply the contact cement, use a roller or brayer to spread a thin, even coat of adhesive to both surfaces.

Step 3: Apply the Edge Banding* Once the contact cement has been applied, you can apply the edge banding. Start by aligning the edge banding with the edge of the substrate.
* Once the edge banding is aligned, press it down firmly into place. You can use a roller or brayer to help bond the edge banding to the substrate.

Step 4: Trim the Excess* Once the edge banding is applied, you need to trim off the excess. To do this, use a sharp utility knife to score the edge banding along the edge of the substrate.
* Once the edge banding has been scored, you can snap it off.

Step 5: Sand and Finish* The final step is to sand and finish the edge banding. To sand the edge banding, use a sanding block to sand it until it is flush with the surface of the substrate.
* Once the edge banding has been sanded, you can apply a finish to it. You can use a clear finish, such as polyurethane, or you can use a stain or paint to match the color of the substrate.

2025-01-16

Previous：How to Cut Edge Banding [With Pictures]

Next：Cabinet Edge Banding Usage Guide: How Much Do You Need?