How to Thread Edge Banding on an Edge Bander174

As a leading Chinese edge banding manufacturer, we understand the importance of efficient and accurate edge banding application in the furniture industry. One of the crucial steps in this process is properly threading the edge banding material through the edge bander machine. Here's a comprehensive guide on how to thread edge banding on an edge bander:

Prepare the Edge Bander and Edge Banding

Before threading, ensure that the edge bander is switched off, cleaned, and properly adjusted. Measure and cut the edge banding to the required length and apply adhesive to one edge of the material.

Open the Pressure Rollers

Locate the pressure rollers on the edge bander and manually open them to create a gap. These rollers will guide the edge banding material through the machine.

Thread the Edge Banding

Starting from the infeed end of the edge bander, insert the edge banding material into the gap between the pressure rollers. Gently guide the material through the rollers and onto the glue roller, which will apply the adhesive to the uncoated side of the edge banding.

Pass the Edge Banding Through the Cutter

Once the edge banding has passed through the glue roller, it will enter the cutter, which will trim the excess material flush with the edge of the workpiece.

Guide the Edge Banding onto the Outfeed

After trimming, guide the edge-banded workpiece onto the outfeed conveyor. The outfeed rollers will apply pressure to ensure a tight bond between the edge banding and the workpiece.

Trim and Buff the Edge Banding

Once the workpiece has exited the outfeed, use a handheld trimmer to remove any excess edge banding material that may have been trimmed by the cutter. Optionally, use a buffing wheel to smooth out the edge banding and create a professional finish.

Troubleshooting Tips

Here are some tips to troubleshoot common issues that may arise while threading edge banding:
Edge banding material is not feeding properly: Check that the pressure rollers are open enough and that the edge banding is inserted straight.
Adhesive is not being applied evenly: Verify that the glue roller is evenly coated and the edge banding is making good contact with the roller.
Edge banding is not being trimmed flush: Adjust the cutter position to ensure it is aligned correctly with the edge of the workpiece.
Edge banding is peeling off: Use a stronger adhesive or increase the pressure applied by the outfeed rollers.

Conclusion

Properly threading edge banding on an edge bander is crucial for efficient and high-quality furniture production. By following these steps and troubleshooting tips, manufacturers can ensure optimal performance and achieve professional-looking, durable edge banding results.

2025-01-16

Previous：Furniture Edge Banding Emits Strong Odor: Why and How to Mitigate It

Next：Why is My Furniture Edge Banding Scratched?