How to Apply PVC Edge Banding to Plywood146

PVC edge banding is a popular and cost-effective way to finish the edges of plywood. It is durable, easy to clean, and comes in a variety of colors and finishes. In this article, we will provide step-by-step instructions on how to apply PVC edge banding to plywood.

Materials* PVC edge banding
* Contact cement
* Edge banding trimmer
* Flush trim bit
* Router
* Sandpaper
* Tack cloth

Step 1: Prepare the Plywood* Sand the edges of the plywood to remove any splinters or rough spots.
* Wipe the edges of the plywood with a tack cloth to remove any dust or debris.

Step 2: Apply Contact Cement* Apply a thin, even coat of contact cement to the edges of the plywood and the back of the PVC edge banding.
* Allow the contact cement to dry for 5-10 minutes.

Step 3: Apply the PVC Edge Banding* Align the PVC edge banding with the edge of the plywood and press it into place.
* Use a roller or burnishing tool to ensure that the edge banding is securely adhered to the plywood.

Step 4: Trim the Edge Banding* Use an edge banding trimmer to trim the excess edge banding from the top and bottom of the plywood.
* Use a flush trim bit to trim the excess edge banding from the sides of the plywood.

Step 5: Sand the Edge Banding* Sand the edge banding to smooth any rough edges.
* Start with a coarse grit sandpaper and work your way up to a fine grit sandpaper.

Step 6: Clean the Edge Banding* Wipe the edge banding with a tack cloth to remove any dust or debris.

Tips* Use a sharp edge banding trimmer to get clean, precise cuts.
* Be careful not to apply too much contact cement, as this can cause the edge banding to bubble.
* If you are applying PVC edge banding to a large piece of plywood, it is helpful to have a helper.
* PVC edge banding can be stained or painted to match the finish of the plywood.

ConclusionApplying PVC edge banding to plywood is a relatively simple process that can be completed in a few hours. By following the instructions in this article, you can achieve a professional-looking finish that will protect the edges of your plywood and give it a more polished look.

2025-01-17

Previous：How to Slot Aluminum Edge Banding

Next：How to Edge Band a Curved Contour with a Contour Edgebander