How to Remove Edge Banding283

Edge banding is a thin strip of material that is applied to the edges of furniture to cover the exposed wood. It is typically made of PVC, melamine, or veneer. Edge banding can be glued or nailed in place. If you need to remove edge banding, there are a few different methods you can use.

Removing Glued Edge Banding

If the edge banding is glued in place, you will need to use a heat gun or a hair dryer to soften the glue. Once the glue is soft, you can use a putty knife or a scraper to pry the edge banding off. Be careful not to damage the wood underneath the edge banding.

Removing Nailed Edge Banding

If the edge banding is nailed in place, you will need to use a hammer and a nail set to remove the nails. Once the nails are removed, you can use a putty knife or a scraper to pry the edge banding off.

Removing Edge Banding with a Router

If you have a router, you can use it to remove edge banding. To do this, you will need to use a straight bit that is slightly wider than the edge banding. Set the depth of the router so that it will only cut through the edge banding, not the wood underneath. Then, run the router along the edge of the furniture, following the contour of the edge banding. Be careful not to press too hard, or you will damage the wood.

Tips for Removing Edge Banding

Here are a few tips for removing edge banding:* Use a sharp putty knife or scraper. A dull blade will be more likely to damage the wood.
* Be patient. It may take some time to remove all of the edge banding.
* If you are having trouble removing the edge banding, try using a heat gun or a hair dryer to soften the glue.
* Be careful not to damage the wood underneath the edge banding.

2025-01-19

Previous：How Picture Framing Mouldings Enhance Artwork

Next：How to Edge Band a Screen?