How to Use Non-Woven Edge Banding31

Non-woven edge banding is a type of furniture trim that is used to cover the exposed edges of plywood, MDF, and other wood-based panels. It is made from a non-woven fabric that is saturated with resin and then pressed onto the edge of the panel. Non-woven edge banding is available in a variety of colors and finishes, and it can be used to create a variety of looks, from traditional to modern.

Benefits of Non-Woven Edge Banding

There are many benefits to using non-woven edge banding, including:
Durability: Non-woven edge banding is very durable and can withstand wear and tear. It is also resistant to moisture and heat, making it a good choice for use in kitchens and bathrooms.
Easy to apply: Non-woven edge banding is easy to apply, even for beginners. It can be applied using a variety of methods, including hot melt glue, contact cement, or staples.
Affordable: Non-woven edge banding is an affordable way to finish the edges of your furniture. It is less expensive than other types of edge banding, such as veneer or solid wood.

How to Use Non-Woven Edge Banding

To use non-woven edge banding, you will need the following:
Non-woven edge banding
Hot melt glue gun
Hot melt glue sticks
Trimmer
Sandpaper

Once you have gathered your materials, you can follow these steps to apply non-woven edge banding:1. Prepare the edge of the panel. The edge of the panel should be clean and free of debris. If the edge is rough, you can sand it smooth with sandpaper.
2. Apply hot melt glue to the edge of the panel. Use the hot melt glue gun to apply a thin bead of glue to the edge of the panel.
3. Apply the non-woven edge banding. Press the non-woven edge banding onto the edge of the panel, aligning it with the edge of the panel.
4. Trim the excess edge banding. Use the trimmer to trim the excess edge banding.
5. Sand the edge banding. Sand the edge banding smooth with sandpaper.

Tips for Using Non-Woven Edge Banding

Here are a few tips for using non-woven edge banding:
Use a sharp trimmer. A sharp trimmer will help you to get a clean, even cut.
Be careful not to apply too much glue. Too much glue can make the edge banding difficult to apply and can cause it to bubble.
Allow the glue to dry completely before trimming the edge banding. This will help to prevent the edge banding from peeling off.

Conclusion

Non-woven edge banding is a versatile and affordable way to finish the edges of your furniture. It is easy to apply and can be used to create a variety of looks. By following the tips above, you can get a professional-looking finish that will last for years.

2025-01-24

Previous：What is the Best Type of Solid Wood Edge Banding?

Next：How to Repair Scratched or Damaged Blue Edge Banding on Chinese Furniture