How to Apply Edging Tape on a Trimming Machine66

As a leading manufacturer of furniture edging tapes in China, we understand the importance of proper application for ensuring a professional-looking and durable finish. When it comes to applying edging tape using a trimming machine, the process involves several key steps to ensure accuracy and precision.

Materials Required:* Furniture edging tape
* Trimming machine with compatible bit
* Contact cement
* Edgebanding trimmer
* Sandpaper (fine-grit)
* Clean cloth

Step 1: Preparation* Clean the surface of the furniture where the edging tape will be applied, removing any dirt or debris.
* Apply a thin layer of contact cement to the edge of the furniture and the back of the edging tape. Allow the cement to dry slightly until it becomes tacky to the touch.

Step 2: Applying the Edging Tape* Position the edging tape carefully over the edge of the furniture, ensuring that it is centered and aligned.
* Press the edging tape firmly onto the surface using your fingers or a rubber mallet.
* Run the trimming machine along the edge of the furniture, applying gentle pressure to trim off any excess tape.

Step 3: Trimming the Edges* Use the edgebanding trimmer to trim any remaining excess tape along the top and bottom edges of the furniture.
* Hold the trimmer at a slight angle to ensure a clean and precise cut.
* Smooth out any rough edges using fine-grit sandpaper.

Step 4: Finishing Touches* Wipe down the surface of the edging tape with a clean cloth to remove any dust or debris.
* Apply a clear sealant or varnish to protect the edging tape and enhance its durability.

Tips for Success:* Use a sharp trimming bit for clean cuts.
* Apply consistent pressure when trimming to prevent damage to the tape or furniture.
* Test the contact cement on a scrap piece of wood before applying to the actual furniture.
* Allow sufficient time for the contact cement to dry before applying the edging tape.
* If the edging tape does not adhere properly, remove it and reapply with fresh contact cement.

By following these steps, you can achieve professional-looking edges on your furniture using a trimming machine and furniture edging tape. Our commitment to quality and customer satisfaction ensures that you have access to the best edging solutions for your furniture projects.

2025-01-26

Previous：How to Install Wood Veneer Edge Banding

Next：How to Cover Edge Banding on Cabinet Doors