How to Replace Wood Door Edge Banding312

Edge banding is a thin strip of material that is applied to the edges of wood panels to protect them from moisture and damage. It also gives the panels a finished look. Edge banding can be made from a variety of materials, including wood, veneer, laminate, and PVC.

If the edge banding on your wood door is damaged or peeling, you can replace it yourself with a few simple tools. Here's how to do it:

Materials You'll Need:* New edge banding
* Utility knife
* Contact cement
* Roller
* Heat gun
* J-roller

Instructions:1. Remove the old edge banding. Use a utility knife to score the edge banding along the length of the door. Then, carefully peel the edge banding off the door.
2. Clean the surface of the door. Use a damp cloth to clean the surface of the door where the edge banding will be applied. Make sure the surface is dry before continuing.
3. Apply contact cement to the door. Apply a thin layer of contact cement to the edge of the door where the edge banding will be applied. Use a roller to spread the cement evenly.
4. Apply the new edge banding. Peel off the backing paper from the new edge banding and apply it to the door. Use a J-roller to press the edge banding into place.
5. Heat the edge banding. Use a heat gun to heat the edge banding. This will help the contact cement to bond the edge banding to the door.
6. Trim the excess edge banding. Use a utility knife to trim any excess edge banding from the door.

Tips:* If the edge banding is too long, you can trim it to size using a utility knife.
* If the edge banding is not wide enough, you can apply two or more strips of edge banding side by side.
* If the edge banding is not thick enough, you can apply a second layer of edge banding on top of the first layer.
* If you are using a laminate edge banding, you will need to use a special adhesive that is designed for laminates.

How to Choose the Right Edge BandingWhen choosing edge banding, there are a few things to keep in mind:
* The material. Edge banding can be made from a variety of materials, including wood, veneer, laminate, and PVC. Each material has its own unique advantages and disadvantages.
* The thickness. The thickness of the edge banding will determine how durable it is. Thicker edge banding is more durable, but it can also be more difficult to apply.
* The width. The width of the edge banding will determine how much of the edge of the door it will cover. Wider edge banding will provide more protection, but it can also be more expensive.
* The color and finish. The color and finish of the edge banding should match the color and finish of the door. This will help the edge banding to blend in with the door and create a finished look.

2025-01-26

Previous：How to Apply Flat Edge Banding: A Comprehensive Guide

Next：How to Remove Pre-Glued Edge Banding