How to Repair Cabinet Edge Banding238

Cabinet edge banding is a thin strip of material that is applied to the edges of cabinet doors and panels to protect them from damage and to give them a finished look. Over time, edge banding can become damaged or worn, which can make the cabinet look unsightly. Fortunately, repairing edge banding is a relatively easy and inexpensive process.

There are two main types of edge banding: wood veneer and plastic laminate. Wood veneer edge banding is made from a thin layer of real wood that is glued to the edge of the cabinet. Plastic laminate edge banding is made from a durable plastic material that is also glued to the edge of the cabinet. Both types of edge banding can be repaired using the same basic techniques.

Repairing Wood Veneer Edge Banding

To repair wood veneer edge banding, you will need the following materials:
Sandpaper
Wood glue
Clamps
A sharp knife

First, sand the damaged area of the edge banding until it is smooth. Then, apply a thin layer of wood glue to the damaged area. Align the edge banding and press it into place. Use clamps to hold the edge banding in place until the glue dries. Once the glue is dry, trim any excess edge banding with a sharp knife.

Repairing Plastic Laminate Edge Banding

To repair plastic laminate edge banding, you will need the following materials:
A heat gun
A putty knife
Plastic laminate repair tape

First, heat the damaged area of the edge banding with a heat gun. This will soften the plastic laminate and make it more pliable. Then, use a putty knife to apply plastic laminate repair tape to the damaged area. Press the repair tape into place and smooth it out with the putty knife. Once the repair tape is in place, allow it to cool for several minutes. Trim any excess repair tape with a sharp knife.

Tips for Repairing Edge Banding
Use a fine-grit sandpaper to sand the damaged area. This will help to create a smooth surface for the repair.
Apply a thin layer of glue to the damaged area. Too much glue can cause the repair to fail.
Use clamps to hold the edge banding in place until the glue dries. This will help to ensure a strong bond.
Trim any excess edge banding with a sharp knife. This will give the repair a clean and finished look.

2025-01-28

Previous：How to Install WPC Edge Banding Like a Pro

Next：How to Cut Miter Joints for Edge Banding