How to Install Stainless Steel Door and Window Edge Sealing Strips4

Stainless steel door and window edge sealing strips are an essential component for sealing gaps around doors and windows, preventing air and water infiltration.

Steps for Installing Stainless Steel Door and Window Edge Sealing Strips:

1. Prepare the Surface:

Clean the surface where the sealing strip will be installed to remove any dirt or debris. If necessary, use a scraper to remove any old sealant or weatherstripping.

2. Measure and Cut the Strip:

Measure the length of the door or window frame where the sealing strip will be installed. Cut the strip to the desired length using a sharp utility knife or scissors.

3. Apply Adhesive:

Apply a continuous bead of high-quality adhesive to the back of the sealing strip. Ensure the adhesive is applied evenly and firmly pressed into the strip's channel.

4. Position and Install the Strip:

Position the sealing strip on the door or window frame and press it firmly into place. Start at one end and work your way along the length of the strip, ensuring it is seated properly.

5. Trim Excess:

Once the strip is installed, use a utility knife to trim any excess material at the ends and corners.

6. Secure the Strip (Optional):

For added security, you can use small screws or nails to fix the sealing strip in place. However, this step is generally not necessary if the adhesive is applied correctly.

Tips for Successful Installation:

* Use high-quality adhesive specifically designed for outdoor sealing applications.
* Allow the adhesive to cure for the recommended time before closing the door or window.
* Regularly inspect the sealing strip for any damage or wear and tear, and replace it if necessary.
* For curved surfaces, use a heat gun or hair dryer to soften the strip and conform it to the curvature.
* For double-hung windows, install an inner and outer sealing strip to ensure a complete seal.

2024-10-05

---

Previous：What Type of Edge Banding Should Be Used for Background Wall Sides?

Next：A Comprehensive Guide: How to Identify Trim on Cabinet Doors