How to Trim Edge Banding Flush41

Edge banding is a thin strip of material applied to the edges of wood to cover the exposed core and provide a finished appearance. When applied properly, edge banding can create a seamless transition between the surface of the wood and the edge. One of the most important aspects of applying edge banding is trimming it flush with the surface of the wood. Here's a step-by-step guide on how to trim edge banding flush:

Tools and Materials* Utility knife
* Flush trim bit
* Router
* Safety glasses
* Dust mask

Step 1: Score the Edge Banding* Put on safety glasses and a dust mask.
* Using a utility knife, score the edge banding along the edge of the wood. This will help to prevent the edge banding from chipping when you trim it.
* Be careful not to score the wood itself.

Step 2: Install the Flush Trim Bit* Install the flush trim bit in the router. The size of the bit should match the thickness of the edge banding.
* Adjust the height of the bit so that it is slightly below the surface of the wood.

Step 3: Trim the Edge Banding* Hold the router against the edge of the wood, with the bit resting on the edge banding.
* Turn on the router and slowly move it along the edge of the wood.
* The bit will trim the edge banding flush with the surface of the wood.

Step 4: Clean Up* Once you have trimmed the edge banding, use a vacuum cleaner to clean up the dust.
* Inspect the edge banding to make sure that it is flush with the surface of the wood.
* If there are any rough edges, you can use sandpaper to smooth them out.

Tips* Use a sharp utility knife to score the edge banding. A dull knife will tear the edge banding.
* Hold the router firmly against the edge of the wood while trimming the edge banding. This will help to prevent the bit from slipping.
* Move the router slowly along the edge of the wood. Rushing the process can lead to uneven trimming.
* If you are trimming a large piece of edge banding, it is helpful to have a helper to hold the wood steady.
* Practice on a scrap piece of wood before trimming the edge banding on your project. This will help you to get the hang of it and avoid any mistakes.

2025-02-02

Previous：How to Clean Edge Banding

Next：How to Edge Band a Wardrobe Trim Strip