How to Remove Wood Veneer Edge Banding350

Edge banding is a thin strip of wood or other material that is applied to the edges of plywood or other wood panels to give them a finished look. It can be glued on, nailed on, or stapled on. If you need to remove edge banding, there are a few different ways to do it.

Method 1: Using a Utility Knife

If the edge banding is glued on, you can use a utility knife to cut it off. Be careful not to cut into the wood panel itself. To do this, score the edge banding along its length with the utility knife, then pry it off with a flathead screwdriver or a putty knife. You may need to use a hammer to tap the screwdriver or putty knife under the edge banding to loosen it.

Method 2: Using a Heat Gun

If the edge banding is nailed or stapled on, you can use a heat gun to soften the glue or staples. Once the glue or staples are softened, you can pry the edge banding off with a flathead screwdriver or a putty knife. Be careful not to apply too much heat, as this can damage the wood panel.

Method 3: Using a Solvent

If the edge banding is glued on, you can use a solvent to dissolve the glue. Apply the solvent to the edge banding with a brush or a rag, then wait for the glue to dissolve. Once the glue is dissolved, you can pry the edge banding off with a flathead screwdriver or a putty knife.

2025-02-03

Previous：How to Score Edge Banding for Perfect Adhesion

Next：How to Deal with Cabinet Edging Strips?