[Machine translation] [Thickened Edge Banding Process Video] How to Apply Thickened Edge Banding to Furniture81

[Machine translation] Introduction

Thickened edge banding is a process of applying a thick strip of material to the edges of furniture or other wood products. This process can be used to create a variety of looks, from a simple, clean line to a more decorative or ornate edge. Thickened edge banding can also be used to protect the edges of furniture from wear and tear.

[Machine translation] Materials

The following materials are needed for the thickened edge banding process:
Thickened edge banding material
Wood glue
Clamps
Router or edge bander
Sandpaper

[Machine translation] Instructions
Prepare the edge of the furniture. The edge of the furniture should be clean and free of any dirt or debris. If the edge is not square, it should be sanded or routed to create a straight edge.
Apply wood glue to the edge of the furniture. Use a thin, even coat of wood glue to the edge of the furniture. Be sure to apply the glue to the entire edge, including the top and bottom.
Apply the thickened edge banding material. Place the thickened edge banding material on the edge of the furniture, aligning it with the edge of the wood. Press the edge banding material into the glue, making sure that it is firmly attached.
Clamp the edge banding material. Use clamps to hold the edge banding material in place while the glue dries. The clamps should be placed every few inches along the edge of the furniture.
Remove the clamps. Once the glue has dried, remove the clamps.
Sand the edge banding material. Use sandpaper to sand the edge banding material flush with the edge of the furniture. Start with a coarse grit sandpaper and gradually work your way to a finer grit sandpaper.

[Machine translation] Tips
Use a high-quality thickened edge banding material. This will ensure that the edge banding is durable and long-lasting.
Apply the wood glue evenly and thinly. Too much glue can cause the edge banding to ripple or bubble.
Clamp the edge banding material firmly in place. This will help to prevent the edge banding from shifting or coming loose.
Sand the edge banding material carefully. This will help to create a smooth, finished edge.

[Machine translation] Conclusion

Thickened edge banding is a relatively simple process that can be used to create a variety of looks. By following the instructions in this article, you can apply thickened edge banding to your furniture or other wood products.

[Machine translation] Video

[Insert video of thickened edge banding process]

2025-02-04

Previous：Can Edge Banding Glue Be Transparent?

Next：How to Remove Veneer Tape Cleanly