How to Sand Edge Banding After Application281

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, particleboard, or MDF to give it a finished look and protect it from moisture and wear. Once the edge banding is applied, it needs to be sanded to create a smooth, even surface.

There are a few different ways to sand edge banding. The most common method is to use a handheld sander. Start by attaching a fine-grit sandpaper to the sander. Then, gently sand the edge banding in the direction of the grain. Be careful not to apply too much pressure, as this could damage the edge banding.

Another option is to use a sanding block. Sanding blocks are available in a variety of shapes and sizes, so you can choose one that is comfortable for you to hold. Attach a fine-grit sandpaper to the sanding block and sand the edge banding in the direction of the grain.

If you are sanding a large area of edge banding, you may want to use a power sander. Power sanders can be rented from most hardware stores. Start by attaching a fine-grit sandpaper to the power sander. Then, set the sander to a low speed and gently sand the edge banding in the direction of the grain.

Once you have sanded the edge banding, you can finish it by applying a clear coat. This will help to protect the edge banding from moisture and wear. Clear coats are available in a variety of finishes, so you can choose one that matches the look of your furniture.

Here are some additional tips for sanding edge banding:
Always use a fine-grit sandpaper.

2025-02-05

Previous：How to Choose Edging Strips in Changsha

Next：Edge Banding Strips vs. Edge Bander Machines: Which Is Right for Your Operation?