How to Install Concealed Cabinet Edge Banding36

Concealed cabinet edge banding is a type of edging that is applied to the exposed edges of plywood or MDF cabinetry. It provides a clean, finished look and helps to protect the edges from damage.

There are two main types of concealed cabinet edge banding: self-adhesive and non-adhesive. Self-adhesive edge banding is simply peeled and pressed into place, while non-adhesive edge banding requires the use of contact cement.

In this article, we will discuss how to install concealed cabinet edge banding using both self-adhesive and non-adhesive methods.

Materials you will need:* Concealed cabinet edge banding
* Scissors
* Utility knife
* Contact cement (for non-adhesive edge banding)
* Iron or heat gun
* Edging roller
* Sandpaper

Instructions for installing self-adhesive edge banding:1. Measure the length of the exposed edge of the cabinetry.
2. Cut the edge banding to the desired length.
3. Peel off the backing paper from the edge banding.
4. Align the edge banding with the exposed edge of the cabinetry.
5. Press the edge banding firmly into place.
6. Use an edging roller to roll the edge banding into place.
7. Trim any excess edge banding with a utility knife.
8. Sand the edges of the edge banding to smooth them.

Instructions for installing non-adhesive edge banding:1. Measure the length of the exposed edge of the cabinetry.
2. Cut the edge banding to the desired length.
3. Apply contact cement to both the edge banding and the exposed edge of the cabinetry.
4. Allow the contact cement to dry for 1-2 minutes.
5. Align the edge banding with the exposed edge of the cabinetry.
6. Press the edge banding firmly into place.
7. Use an edging roller to roll the edge banding into place.
8. Trim any excess edge banding with a utility knife.
9. Sand the edges of the edge banding to smooth them.

Tips for installing concealed cabinet edge banding:* Use a sharp utility knife to cut the edge banding.
* Be careful not to apply too much pressure when pressing the edge banding into place.
* Use an edging roller to ensure that the edge banding is securely attached.
* Trim any excess edge banding with a utility knife.
* Sand the edges of the edge banding to smooth them.

ConclusionInstalling concealed cabinet edge banding is a relatively easy project that can be completed in a few hours. By following the instructions in this article, you can achieve a professional-looking finish that will protect your cabinetry for years to come.

2024-10-06

Previous：Living Room Transition Strips vs. Baseboard Moldings: What‘s the Difference?

Next：How to Make Aluminum Alloy Edge Banding Look Stunning