How to Replace Wood Veneer Edge Banding278

Wood veneer edge banding is a thin strip of wood that is applied to the edges of plywood or other wood panels to give them a finished look. Over time, edge banding can become damaged or worn, and it may need to be replaced. Replacing wood veneer edge banding is a relatively simple process that can be completed in a few hours.

Materials you will need:* New wood veneer edge banding
* Wood glue
* Clamps
* Sandpaper
* A sharp knife
* A miter saw or a coping saw
* A router (optional)

Instructions:1.

Remove the old edge banding:

- Use a sharp knife to score the edge banding along the edge of the plywood.
- Carefully pry the edge banding off of the plywood using a thin putty knife or a chisel.
2.

Prepare the plywood edge:

- Sand the edge of the plywood to remove any glue residue or splinters.
- If the edge of the plywood is not square, use a router to create a square edge.
3.

Apply the wood glue:

- Apply a thin layer of wood glue to the edge of the plywood.
4.

Attach the new edge banding:

- Position the new edge banding on the edge of the plywood and press it into place.
- Use clamps to hold the edge banding in place while the glue dries.
5.

Trim the excess edge banding:

- Once the glue has dried, use a sharp knife to trim the excess edge banding flush with the edge of the plywood.
6.

Sand the edge banding:

- Sand the edge banding smooth using sandpaper.

Tips:* Use a high-quality wood glue that is specifically designed for bonding wood to wood.
* When applying the wood glue, be sure to apply it evenly to the entire surface of the edge banding.
* Use enough clamps to hold the edge banding in place while the glue dries.
* If you are using a miter saw to cut the edge banding, be sure to use a sharp blade and to cut at a 45-degree angle.
* If you are using a coping saw to cut the edge banding, be sure to use a sharp blade and to cut along the grain of the wood.
* If you are using a router to create a square edge on the plywood, be sure to use a sharp bit and to rout along the grain of the wood.
* Once the edge banding has been replaced, you can finish it by staining, painting, or lacquering it.

2025-02-13

---

Previous：How to Seamlessly Join Edge Banding in Cabinetry

Next：The Essential Guide: Do Wine Cabinets Need Edge Banding?