How to Remove Edge Banding from Wood Panels160

Edge banding is a thin strip of material that is applied to the edges of wood panels to provide a finished look and protect the panel from damage. It is typically made of wood, plastic, or metal and can be either glued or nailed in place. Edge banding can be removed for a variety of reasons, such as to replace it with a different material, to repair damage, or to access the inside of the panel.

The process of removing edge banding can be done by hand or with the use of power tools. If you are removing edge banding by hand, you will need a sharp utility knife or a chisel. You will also need a hammer or mallet. To remove the edge banding, insert the utility knife or chisel into the joint between the edge banding and the panel. Be careful not to damage the panel. Once the knife or chisel is in place, tap it with the hammer or mallet until the edge banding is loose. Then, pry the edge banding off the panel with your fingers.

If you are removing edge banding with power tools, you can use a power drill or a router. To remove the edge banding with a power drill, drill a series of holes along the joint between the edge banding and the panel. Be careful not to drill too deeply into the panel. Once the holes have been drilled, use a pry bar to remove the edge banding.

To remove the edge banding with a router, set the router to the depth of the edge banding. Then, rout along the joint between the edge banding and the panel. Be careful not to rout too deeply into the panel. Once the edge banding has been routed, it can be easily removed by hand.

Once the edge banding has been removed, you can clean up the edges of the panel with sandpaper. Then, you can apply new edge banding or leave the panel as is.

Here are some additional tips for removing edge banding:
If the edge banding is glued in place, you may need to use a heat gun to soften the glue before you can remove it.
If the edge banding is nailed in place, you will need to use a nail puller to remove the nails.
Be careful not to damage the panel when you are removing the edge banding.
Wear safety glasses and gloves when you are removing edge banding.

2025-02-16

Previous：Cabinet Edge Banding: Is It Pricking Your Fingers? Tips to Solve the Problem

Next：How to Bend Metal Edge Banding: A Comprehensive Guide