How to Remove Edge Banding: A Step-by-Step Video Guide342

Edge banding is a thin strip of material, typically made from PVC, that is applied to the exposed edges of furniture panels. It serves both a functional and aesthetic purpose, protecting the edges from damage and providing a finished look. However, there may come a time when you need to remove the edge banding, perhaps to replace it with a different color or material. This video guide will show you how to remove edge banding safely and effectively.

Step 1: Gather your tools

You will need the following tools for this project:
A sharp utility knife
A heat gun or hair dryer
A putty knife or scraper
A measuring tape
Safety glasses

Step 2: Prepare your work area

Clear a workspace where you can work comfortably and safely. Protect your work surface with a drop cloth or cardboard. Wear safety glasses to protect your eyes from flying debris.

Step 3: Heat the edge banding

Turn on the heat gun or hair dryer and direct it at the edge banding. Hold the heat source about 2 inches away from the surface and move it slowly along the edge, heating the bonding adhesive. Be careful not to hold the heat source too close to the surface, as this could damage the material.

Step 4: Insert the utility knife

Once the edge banding is heated, insert the tip of the utility knife blade into the seam between the edge banding and the furniture panel. Be careful not to cut into the panel itself. Gently pry the edge banding away from the panel using the utility knife.

Step 5: Remove the edge banding

Once the edge banding is loose enough, you can use the putty knife or scraper to remove it completely. Insert the putty knife under the edge banding and gently pry it away from the panel. Work your way along the entire length of the edge, removing the edge banding as you go.

Step 6: Clean the surface

Once the edge banding is removed, you can clean the surface of the furniture panel with a damp cloth to remove any remaining adhesive residue. Allow the surface to dry completely before applying new edge banding or finishing the project.

Tips
If the edge banding is particularly difficult to remove, you may need to apply more heat or use a stronger tool.
Be patient and take your time. Rushing the process could result in damage to the furniture panel.
If you are unsure about how to remove edge banding, it is always best to consult with a professional.

2025-02-18

Previous：How to Install Metal Edge Trim: A Comprehensive Guide from a Chinese Factory

Next：How to Choose the Right White Edge Banding