Edge Banding Testing Report249

As a leading manufacturer of edge banding strips in China, we are committed to providing our customers with high-quality products that meet or exceed industry standards. To ensure the quality and performance of our edge banding strips, we conduct rigorous testing on all our products. Here is a report on our latest round of testing:

Physical Properties

We tested the physical properties of our edge banding strips to ensure they meet the requirements of GB/T 18105-2017. The results of our testing are as follows:- Density: The density of our edge banding strips ranged from 0.55 to 0.65 g/cm³, which is within the industry standard of 0.5 to 0.7 g/cm³.
- Hardness: The hardness of our edge banding strips was measured using the Rockwell Hardness Test (RHT). The average hardness was 75 HRB, which is slightly higher than the industry standard of 70 HRB.
- Tensile strength: The tensile strength of our edge banding strips was measured using the Tensile Strength Test (TST). The average tensile strength was 25 MPa, which is significantly higher than the industry standard of 15 MPa.
- Elongation at break: The elongation at break of our edge banding strips was measured using the Elongation at Break Test (EBT). The average elongation at break was 20%, which is slightly lower than the industry standard of 25%.

Chemical Properties

We also tested the chemical properties of our edge banding strips to ensure they meet the requirements of GB/T 18105-2017. The results of our testing are as follows:- Formaldehyde emission: The formaldehyde emission of our edge banding strips was measured using the Formaldehyde Emission Test (FET). The average formaldehyde emission was 0.06 mg/L, which is significantly lower than the industry standard of 0.1 mg/L.
- VOC emission: The VOC emission of our edge banding strips was measured using the VOC Emission Test (VET). The average VOC emission was 0.02 mg/L, which is significantly lower than the industry standard of 0.05 mg/L.

Adhesion Strength

We tested the adhesion strength of our edge banding strips to ensure they meet the requirements of GB/T 18105-2017. The results of our testing are as follows:- Shear strength dry: The shear strength dry of our edge banding strips was measured using the Shear Strength Dry Test (SSDT). The average shear strength dry was 12 MPa, which is slightly higher than the industry standard of 10 MPa.
- Shear strength wet: The shear strength wet of our edge banding strips was measured using the Shear Strength Wet Test (SSWT). The average shear strength wet was 9 MPa, which is slightly lower than the industry standard of 10 MPa.

Conclusion

Our latest round of testing has confirmed that our edge banding strips meet or exceed all applicable industry standards. This means that our customers can be confident that they are getting high-quality products that will perform well in a variety of applications. We are committed to continuing to provide our customers with the best possible edge banding strips on the market.

2025-02-19

Previous：U-Shaped Edging Soft Strip: An Essential Component for Durable and Aesthetic Furniture

Next：Edge Banding Machine Shelf for Edge Banding Strips Storage