How to Replace Cabinet Door Edge Banding27

Cabinet door edge banding is a thin strip of material that is applied to the edges of cabinet doors to provide a finished look and protect the edges from damage. Over time, edge banding can become damaged or worn, and it may need to be replaced. Replacing cabinet door edge banding is a relatively simple process that can be completed in a few hours with the right tools and materials.

Tools and Materials* New edge banding
* Utility knife
* Edge banding trimmer
* Sandpaper
* Iron or edge bander
* Wood glue

Instructions1. Remove the old edge banding. Use a utility knife to score the edge banding along the edge of the cabinet door. Be careful not to cut into the wood of the door. Once you have scored the edge banding, use a putty knife or a flathead screwdriver to pry it off the door.
2. Clean the edge of the door. Use sandpaper to remove any glue or debris from the edge of the door. This will help to ensure that the new edge banding will adhere properly.
3. Apply wood glue to the edge of the door. Use a thin coat of wood glue to the edge of the door. Be sure to apply the glue evenly to the entire surface.
4. Apply the new edge banding. Start by applying the new edge banding to one end of the door. Align the edge banding with the edge of the door and press it into place. Use an iron or an edge bander to heat the edge banding and activate the glue. Once the glue is activated, the edge banding will bond to the door.
5. Trim the excess edge banding. Use an edge banding trimmer to trim the excess edge banding from the ends of the door. Be sure to trim the edge banding flush with the edge of the door.
6. Sand the edge banding. Use sandpaper to sand the edge banding smooth. Be sure to sand the edge banding lightly so that you do not damage the finish.

Tips* Use a sharp utility knife to score the old edge banding. A dull knife will make it more difficult to remove the old edge banding.
* Be careful not to cut into the wood of the door when removing the old edge banding.
* Apply a thin coat of wood glue to the edge of the door before applying the new edge banding. This will help to ensure that the new edge banding will adhere properly.
* Use an iron or an edge bander to heat the new edge banding and activate the glue. This will help to bond the edge banding to the door.
* Trim the excess edge banding from the ends of the door using an edge banding trimmer.
* Sand the edge banding smooth using sandpaper.

ConclusionReplacing cabinet door edge banding is a relatively simple process that can be completed in a few hours with the right tools and materials. By following these instructions, you can easily replace the edge banding on your cabinet doors and give them a fresh, new look.

2025-02-20

Previous：What Types of Edge Banding Are Available for Ecological Boards?

Next：How to Install Laminate Flooring Moldings