How to Deal with Flush Trim Edge Banding192

Flush trim edge banding is a type of edge banding that is used to create a seamless finish on the edges of furniture and other woodworking projects. It is applied using a flush trim router, which trims the edge banding flush with the surface of the workpiece, creating a smooth and professional-looking finish.

Flush trim edge banding is available in a variety of materials, including wood, plastic, and metal. The most common type of flush trim edge banding is made from PVC, which is a durable and flexible material that is resistant to chipping and scratching. PVC flush trim edge banding is also available in a wide range of colors and finishes, making it easy to match the color and grain of the workpiece.

To apply flush trim edge banding, you will need a flush trim router, a straight edge guide, and a sharp flush trim bit. The first step is to cut the edge banding to the length of the workpiece. Then, apply a thin layer of contact cement to the edge of the workpiece and to the back of the edge banding. Allow the contact cement to dry for a few minutes before applying the edge banding to the workpiece.

Once the edge banding is applied, use the flush trim router to trim the edge banding flush with the surface of the workpiece. Be sure to use a sharp flush trim bit and to move the router slowly and carefully to avoid chipping or tearing the edge banding. Once the edge banding is trimmed, you can sand the edges to smooth them and remove any excess glue.

Flush trim edge banding is a versatile and easy-to-use material that can be used to create a professional-looking finish on the edges of furniture and other woodworking projects. It is available in a variety of materials, colors, and finishes, making it easy to find the perfect edge banding for your project.

Tips for Applying Flush Trim Edge Banding* Use a sharp flush trim bit and move the router slowly and carefully to avoid chipping or tearing the edge banding.
* If the edge banding is not flush with the surface of the workpiece, use a sanding block to sand the edges until they are flush.
* Apply a thin layer of contact cement to the edge of the workpiece and to the back of the edge banding. Allow the contact cement to dry for a few minutes before applying the edge banding to the workpiece.
* Once the edge banding is applied, use a flush trim router to trim the edge banding flush with the surface of the workpiece.
* Be sure to wear safety glasses and a dust mask when using a flush trim router.

2025-02-20

Previous：Is Edge Banding Quality Control Easy?

Next：How to Replace Aluminum Profile Edging