How to Install Cabinet Edge Banding Trim17

Edge banding trim is a thin strip of material, usually made of PVC, wood, or metal, that is applied to the exposed edges of plywood, MDF, or particle board to create a finished look. It can also be used to cover up imperfections or damage on existing edges. Cabinet edge banding trim is available in a variety of colors and finishes to match any décor. Installing cabinet edge banding trim is a relatively simple project that can be completed in a few hours.

Materials* Cabinet edge banding trim
* Wood glue
* Clamps
* Utility knife
* Sandpaper
* Tack cloth
* Iron or heat gun
* Edge trimmer

Instructions1.

Start by preparing the edges of the cabinet. Make sure they are clean, dry, and free of any debris. If there are any imperfections or damage, sand them smooth.2.

Apply a thin layer of wood glue to the edge of the cabinet.3.

Place the edge banding trim on the glue and press it firmly into place. Use a clamp to hold the trim in place while the glue dries.4.

Once the glue is dry, trim the excess edge banding trim with a utility knife.5.

Sand the edges of the trim smooth and then wipe them down with a tack cloth to remove any dust.6.

If you are using PVC edge banding trim, you will need to heat it up to seal the edges. This can be done with an iron or a heat gun. Be careful not to overheat the trim, as it can melt.7.

Once the trim is sealed, use an edge trimmer to flush trim the edges of the trim with the surface of the cabinet.

Tips* Use a sharp utility knife to cut the edge banding trim. A dull knife will tear the trim and make it difficult to install.
* Apply even pressure when pressing the trim into place. This will help to ensure that the glue bonds evenly.
* If you are using PVC edge banding trim, be sure to heat it up evenly. Overheating can cause the trim to melt.
* Use an edge trimmer to flush trim the edges of the trim. This will give the cabinet a professional finish.

Conclusion

Installing cabinet edge banding trim is a simple project that can add a touch of style to any cabinet. By following the steps outlined above, you can easily install edge banding trim and give your cabinets a professional finish.

2025-02-21

Previous：How to Seal Holes with Self-Adhesive Edge Banding

Next：How to Dismantle Aluminum Trim Edge Banding: A Comprehensive Guide from a Chinese Furniture Edge Banding Factory