How to Edge Band with T-Molding31

T-molding is a versatile and affordable way to finish the edges of your furniture, cabinetry, or other woodworking projects. It is a type of edge banding that is typically made from PVC or wood and has a T-shaped profile. The T-shape allows it to be easily installed over the edge of your workpiece, creating a clean and finished look.

To edge band with T-molding, you will need the following supplies:* T-molding
* Miter saw
* Wood glue
* Clamps
* Sandpaper

Once you have gathered your supplies, follow these steps to edge band with T-molding:1. Measure and cut the T-molding. Measure the length of the edge that you want to edge band and cut the T-molding to that length using a miter saw.
2. Apply wood glue to the edge of the workpiece. Apply a thin layer of wood glue to the edge of the workpiece, where you will be installing the T-molding.
3. Position the T-molding on the workpiece. Place the T-molding over the edge of the workpiece, aligning it with the edge.
4. Clamp the T-molding in place. Use clamps to hold the T-molding in place while the glue dries.
5. Sand the T-molding. Once the glue has dried, sand the T-molding smooth, flush with the surface of the workpiece.

Here are some tips for edge banding with T-molding:* Use a sharp miter saw blade to get a clean cut.
* Apply the wood glue evenly to the edge of the workpiece.
* Clamp the T-molding firmly in place while the glue dries.
* Sand the T-molding smooth, flush with the surface of the workpiece.

With these tips, you can easily edge band with T-molding to create a clean and finished look for your furniture, cabinetry, or other woodworking projects.

2024-10-08

Previous：How to Apply Edge Banding: A Comprehensive Guide

Next：How to Edging Clothes with Edging Strip: A Step-by-Step Guide