How to Edge Banding When Edge Banding is Too Wide6

Edge banding is a thin strip of material, typically made of wood, plastic, or metal, that is applied to the exposed edges of a piece of wood or other material, such as particleboard or MDF. It is used to cover the raw edge of the material and to create a finished look. Edge banding can also be used to create decorative effects or to match the edge of the material to the surface of the material.

Edge banding is typically applied with an edge bander machine, which is a type of woodworking machine that uses heat and pressure to bond the edge banding to the edge of the material. However, it is also possible to apply edge banding manually, using a hand-held iron or a heat gun. If you are edge banding manually, it is important to use a heat-resistant adhesive and to apply the edge banding evenly and firmly.

One of the most common problems that people encounter when edge banding is that the edge banding is too wide. This can make it difficult to apply the edge banding evenly and firmly, and it can also result in the edge banding peeling off or coming loose. If you find that the edge banding is too wide, there are a few things that you can do:
Trim the edge banding down to the correct width. This is the most straightforward solution, but it can be time-consuming and difficult to do accurately. If you are trimming the edge banding down by hand, be sure to use a sharp knife or razor blade.
Use a narrower edge bander machine. If you have access to a narrower edge bander machine, you can use it to apply the edge banding to the edge of the material. This is a faster and more accurate solution than trimming the edge banding down by hand.
Apply the edge banding in two pieces. If you are applying the edge banding manually, you can apply it in two pieces. This will make it easier to apply the edge banding evenly and firmly, and it will also reduce the risk of the edge banding peeling off or coming loose.

If you are having trouble edge banding, it is important to remember that practice makes perfect. The more you edge band, the better you will get at it. With a little practice, you will be able to apply edge banding like a pro.

2024-10-08

Previous：How to Edgeband with a Thin Edgebander

Next：How to Edge Band Double-Sided Edgebanding