How to Re-Edge Cabinet Veneer Strips When They Fall Off347

Cabinet veneer strips are a common way to finish the edges of cabinets, but they can sometimes fall off. This can be frustrating, but it's actually a relatively easy fix. Here's how to do it:

Gather Your Materials

You will need the following materials:
New cabinet veneer strips
Wood glue
Clamps
Sandpaper
Tack cloth

Prepare the Cabinet

Before you can re-edge the cabinet, you need to prepare the surface. This means removing any old glue or debris from the edge of the cabinet. You can do this with a chisel or a sanding block.

Once the surface is clean, apply a thin layer of wood glue to the edge of the cabinet. Be sure to spread the glue evenly.

Apply the New Veneer Strips

Next, apply the new veneer strips to the edge of the cabinet. Be sure to align the strips carefully and press them into place firmly. You may need to use clamps to hold the strips in place while the glue dries.

Clamp the Veneer Strips

Once the veneer strips are in place, clamp them down. You can use C-clamps or bar clamps. Be sure to clamp the strips tightly so that the glue has a chance to dry properly.

Allow the Glue to Dry

Allow the glue to dry for at least 24 hours before removing the clamps. Once the glue is dry, you can sand the edges of the veneer strips to smooth them out.

Clean Up

Finally, clean up any dust or debris from the cabinet. You can use a tack cloth or a vacuum cleaner to do this.

Tips

Here are a few tips for re-edging cabinet veneer strips:
Use a sharp chisel or sanding block to remove any old glue or debris from the edge of the cabinet.
Apply a thin layer of wood glue to the edge of the cabinet before applying the new veneer strips.
Align the veneer strips carefully before pressing them into place.
Use clamps to hold the veneer strips in place while the glue dries.
Allow the glue to dry for at least 24 hours before removing the clamps.
Sand the edges of the veneer strips to smooth them out.
Clean up any dust or debris from the cabinet.

2024-12-18

Previous：How to Perfectly Self-Edgeband for a Flawless Furniture Finish

Next：How to Apply Edge Banding to Moldings