Can Edging Strips Used for Stapling Be Changed to Machine Edging?321

As a leading manufacturer of edge banding strips in China, we often encounter customers who ask if it's possible to switch from staple-on edging strips to machine edging. The answer is yes, it is possible, but there are some factors to consider.

Machine Edging vs. Staple-On Edging

Machine edging involves using a machine to apply an edge banding strip to the edge of a panel. This method provides a smooth, seamless finish that is more durable than staple-on edging.

Staple-on edging, on the other hand, involves using staples to secure the edge banding strip to the panel. This method is less durable than machine edging and can result in a less finished appearance.

Factors to Consider

When considering switching from staple-on edging to machine edging, there are several factors to consider:
Panel Thickness: Machine edging is typically used on panels that are at least 16mm thick. Staple-on edging can be used on thinner panels, but it may not be as durable.
Panel Size: Machine edging is more suitable for large panels. Staple-on edging can be used on smaller panels, but it may be more difficult to achieve a consistent finish.
Edge Banding Material: Machine edging can be used with a variety of edge banding materials, including PVC, ABS, and melamine. Staple-on edging is typically used with PVC or ABS.
Cost: Machine edging is typically more expensive than staple-on edging, but it can provide a more durable and professional finish.

How to Change from Staple-On Edging to Machine Edging

If you decide to switch from staple-on edging to machine edging, there are a few steps you need to take:
Purchase a Machine Edger: You will need to purchase a machine edger that is compatible with the type of edge banding material you are using.
Prepare the Panel: The panel should be clean and free of any dust or debris. The edge of the panel should be straight and smooth.
Apply the Edge Banding: Apply the edge banding to the edge of the panel. The edge banding should overhang the edge of the panel by about 1mm.
Trim the Edge Banding: Use a trimmer to trim the excess edge banding from the edge of the panel.
Finish the Edge: The edge can be finished with a sanding block or a polishing wheel to achieve the desired finish.

Conclusion

Switching from staple-on edging to machine edging can provide a number of benefits, including a smoother, more durable finish. However, it is important to consider the factors discussed above before making the switch.

2024-12-18

Previous：How to Glue Edge Banding with Suanfeng Edge Bander

Next：No Hot Melt Glue? No Problem: How to Edge Band with Cold Glue