How to Use a Laser Edging Strip Manually380

Introduction

Laser edging strips are a convenient and efficient way to seal and protect the edges of your furniture. They come in a variety of colors and finishes to match your décor, and they can be applied quickly and easily using a handheld laser. In this article, we'll show you how to use a laser edging strip manually.

Materials and Tools
Laser edging strip
Handheld laser
Scissors
Measuring tape

Instructions
Measure the edge to be sealed. Use a measuring tape to determine the length of the edge that you need to seal. Cut a piece of laser edging strip to the measured length.
Align the edging strip along the edge. Place the laser edging strip along the edge of the furniture, making sure that it is aligned properly.
Start the laser. Turn on the handheld laser and point it at the edge of the edging strip. Hold the laser steady and move it along the length of the strip.
The laser will fuse the edging strip to the furniture. As the laser moves along the strip, it will melt the adhesive backing and bond the strip to the furniture.
Trim any excess edging strip. Once the edging strip has been applied, use scissors to trim any excess material.

Tips
Use a low power setting on the laser to avoid damaging the furniture.
Hold the laser steady while moving it along the edge of the edging strip.
Apply pressure to the laser handle to ensure that the edging strip is properly bonded to the furniture.
If you make a mistake, simply peel off the edging strip and reapply it.

Conclusion

Using a laser edging strip is a quick and easy way to seal and protect the edges of your furniture. By following the instructions in this article, you can achieve a professional-looking finish that will last for years to come.

2024-12-19

Previous：How to Quickly Apply Edgebanding to Wooden Doors

Next：Do Edge Bands Need to Seal All Edges?