How to Install Cabinet Edge Banding [Video]82

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, particleboard, or MDF to create a finished look and protect the core material from moisture and damage. In the case of cabinets, edge banding is typically made of wood, PVC, or melamine and is applied using a hot melt adhesive.

The process of applying edge banding to cabinets is relatively simple, but it does require some precision and care. Here are the steps involved:
Prepare the surface. The first step is to prepare the surface of the cabinet by cleaning it with a damp cloth and removing any dust or debris. Once the surface is clean, apply a thin layer of hot melt adhesive to the edge of the cabinet.
Apply the edge banding. Once the adhesive has been applied, you can position the edge banding on the edge of the cabinet. Be sure to align the edge banding carefully and press it down firmly into the adhesive.
Trim the excess. Once the edge banding has been applied, you can trim the excess using a sharp utility knife. Be careful not to cut into the cabinet itself.
Sand and finish. The final step is to sand the edge banding smooth and apply a finish to protect it. You can use a fine-grit sandpaper to sand the edge banding and then apply a clear finish such as polyurethane or lacquer.

Here is a video that demonstrates the process of applying edge banding to cabinets:[Video]

By following these steps, you can easily apply edge banding to your cabinets and give them a professional-looking finish.

Tips for Applying Edge Banding

Here are a few tips for applying edge banding to cabinets:
Use a sharp utility knife to trim the excess edge banding.
Be careful not to cut into the cabinet itself.
Sand the edge banding smooth before applying a finish.
Apply a clear finish to protect the edge banding from moisture and damage.

2024-12-19

Previous：How to Edge Band a Right Angle: The U-Shaped Edge Banding Solution

Next：How to Install Window Casing Molding