How to Apply Right-Angle Metal Edge Banding [Video]316

Right-angle metal edge banding is a durable and stylish way to finish the edges of your furniture. It can be used on a variety of materials, including wood, glass, and metal. In this video, we'll show you how to apply right-angle metal edge banding.

Materials You'll Need* Right-angle metal edge banding
* Measuring tape
* Pencil
* Miter saw
* Clamps
* Hammer
* Nail set
* Wood glue

Instructions1. Measure the length of the edge you want to band. Cut the metal edge banding to the desired length using a miter saw.
2. Apply a thin layer of wood glue to the edge of the furniture.
3. Place the metal edge banding on the glue and clamp it in place.
4. Use a hammer and nail set to drive nails through the metal edge banding into the furniture.
5. Wipe away any excess glue.

Tips* Use a sharp blade when cutting the metal edge banding. This will help to ensure a clean cut and prevent the metal from fraying.
* Be careful not to overtighten the clamps. This can damage the metal edge banding.
* Allow the glue to dry completely before using the furniture.

Video[Insert video here]

Additional InformationRight-angle metal edge banding is available in a variety of finishes, including brushed nickel, polished chrome, and anodized aluminum. It can be used to add a touch of elegance to any piece of furniture.
If you're not comfortable applying metal edge banding yourself, you can hire a professional to do it for you. However, it's a relatively easy process that you can do yourself with a little bit of practice.
By following the steps in this guide, you can apply right-angle metal edge banding to your furniture like a pro.

2024-12-19

Previous：How to Seal Corners with U-Shaped Edging Strips

Next：How to Edge Band the Fastest: Illustrated Video Guide