How to Seal Corners with U-Shaped Edging Strips372

U-shaped edging strips are commonly used to protect and enhance the edges of furniture, panels, and other surfaces. They provide a clean and professional finish while safeguarding the underlying material from damage. However, when it comes to sealing corners, U-shaped edging strips require a slightly different approach.

Here's a step-by-step guide on how to seal corners with U-shaped edging strips:

Step 1: Measure and Cut the Edging Strip

Measure the length of the edge you want to seal and cut the edging strip accordingly. Make sure to cut it slightly longer than the actual measurement to allow for trimming and adjustment later.

Step 2: Insert the Edging Strip

Insert the edging strip into the groove or channel on the edge of the furniture or panel. Make sure it fits snugly without any gaps or overlaps.

Step 3: Seal the Inner Corner

To seal the inner corner, cut a small piece of edging strip at a 45-degree angle. This will create a miter joint that aligns perfectly when the two edges are joined.

Step 4: Cut the Back of the Edging Strip

On the back side of the corner, where the two edges of the edging strip meet, use a sharp knife or utility blade to cut a small notch. This will allow the edging strip to bend and form a tight seal.

Step 5: Apply Adhesive

Apply a thin layer of wood glue or contact cement to the cut notch and the mitered edge.

Step 6: Join the Edging Strips

Press the two edges of the edging strip together at the corner, ensuring that the mitered joint aligns correctly. Hold them firmly until the adhesive sets.

Step 7: Trim the Excess

Once the adhesive has cured, use a sharp knife or utility blade to trim any excess edging strip that may extend beyond the surface.

Step 8: Sand and Finish

Sand the corner area lightly to smooth out any rough edges or imperfections. You can then apply paint, stain, or a clear finish to match the surrounding surface.

By following these steps, you can achieve a clean and secure seal at corners using U-shaped edging strips. This technique is particularly useful for furniture, cabinetry, countertops, and other applications where a neat and professional finish is desired.

2024-12-19

Previous：How to Edgeband a T-shaped Door Frame

Next：How to Apply Right-Angle Metal Edge Banding [Video]