How to Manually Edge Band with a Roundover Edging with Chinese Furniture Edging Manufacturer51

As a leading Chinese furniture edging strip manufacturer, we understand the importance of high-quality edging for the durability and aesthetics of furniture. One popular edging technique is using a roundover edging strip to create a smooth, rounded edge on furniture panels. While machine edging is commonly used, manual edging can provide greater precision and customization options.

Here's a step-by-step guide on how to manually edge band with a roundover edging:

Materials and Tools Required:- Roundover edging strip
- Contact cement
- Edge banding trimmer
- Utility knife
- Sandpaper (fine and medium grit)
- Soft cloth
- Tack cloth

Step-by-Step Instructions:

1. Preparing the Surface

- Clean the edge of the furniture panel to remove any dirt or debris.
- Apply a thin layer of contact cement to both the edging strip and the edge of the panel.
- Allow the contact cement to dry until it becomes tacky to the touch.

2. Applying the Edging Strip

- Align the edging strip with the edge of the panel and press it firmly into place.
- Use a soft cloth to smooth out any air bubbles or wrinkles.

3. Trimming the Excess

- Once the edging strip is in place, use an edge banding trimmer to remove the excess material at both ends of the panel.
- Hold the trimmer at a 90-degree angle to the edge and make clean, straight cuts.

4. Rounding the Edges

- Using a utility knife, carefully score the edge of the edging strip where it meets the panel.
- Be sure to score the edges evenly along the entire length.
- Fold the scored section of the edging strip over and press it firmly against the panel.
- This will create a rounded edge.

5. Sanding and Finishing

- Use fine-grit sandpaper to smooth out any rough edges or imperfections.
- Gradually switch to medium-grit sandpaper for a smoother finish.
- Wipe the surface with a tack cloth to remove any dust.
- If desired, apply a clear finish or paint to protect the edging strip and enhance its appearance.

Additional Tips:- Use a high-quality roundover edging strip to ensure durability and a smooth finish.
- Apply contact cement evenly to both surfaces to ensure a strong bond.
- Allow sufficient time for the contact cement to dry before pressing the edging strip into place.
- Hold the edge banding trimmer at a consistent angle for precise cuts.
- Be patient and take your time during the sanding process to achieve a smooth and flawless finish.

Conclusion:Manual edging with a roundover edging strip is a versatile technique that can add a touch of refinement and durability to your furniture projects. By following the steps outlined above, you can achieve professional-looking results at home. Remember to practice on scrap pieces before attempting to edge your final furniture items. With a little bit of effort, you can create stunning and long-lasting furniture pieces that will elevate your home decor.

2024-12-22

---

Previous：How to Repair Peeling Edge Banding on Chinese Furniture

Next：How to Apply Edge Banding Glue to U-Shaped PVC Edge Banding