How to Repair Peeling Edge Banding on Chinese Furniture168

Edge banding is a thin strip of material that is applied to the edges of furniture to seal them and provide a finished look. It is commonly used on particleboard, MDF, and plywood furniture. While edge banding is generally durable, it can sometimes peel or lift, especially if it is not properly applied or if the furniture is exposed to moisture or heat. If you find that the edge banding on your Chinese furniture has started to peel, there are a few simple steps you can take to repair it.

Tools and materials you will need:
Sharp knife or utility knife
Sandpaper or sanding block
Wood glue
Clamps
Clean cloth

Step 1: Remove the loose edge banding

Using a sharp knife or utility knife, carefully score the edge of the peeling edge banding. Be careful not to cut into the wood of the furniture. Once the edge banding is scored, you can use your fingers or a pry bar to remove it.

Step 2: Sand the edge of the furniture

Once the loose edge banding has been removed, sand the edge of the furniture to smooth it out. You can use sandpaper or a sanding block to do this. Sanding will help to ensure that the new edge banding adheres properly.

Step 3: Apply wood glue to the edge of the furniture

Apply a thin layer of wood glue to the edge of the furniture. Use a clean brush or cloth to spread the glue evenly. Be careful not to apply too much glue, as this can make it difficult to clamp the edge banding in place.

Step 4: Align the new edge banding

Align the new edge banding with the edge of the furniture. Make sure that the grain of the edge banding is running in the same direction as the grain of the furniture. Once the edge banding is aligned, press it firmly into place.

Step 5: Clamp the edge banding in place

Use clamps to hold the edge banding in place while the glue dries. Make sure that the clamps are tight enough to hold the edge banding securely, but not so tight that they damage the furniture.

Step 6: Remove the clamps and clean up the excess glue

Once the glue has dried, remove the clamps. Use a clean cloth to wipe away any excess glue that has squeezed out from under the edge banding. Be careful not to scratch the new edge banding.

Your furniture is now repaired and the edge banding should be securely in place. With proper care, the edge banding should last for many years to come.

Here are some additional tips for repairing peeling edge banding:
If the edge banding is badly damaged, you may need to replace it. You can purchase new edge banding at most hardware stores.
If the edge banding is peeling due to moisture damage, make sure to dry the furniture thoroughly before repairing it. You can use a fan or hair dryer to speed up the drying process.
To prevent edge banding from peeling in the future, you can seal it with a clear finish. This will help to protect the edge banding from moisture and heat.

2024-12-22

Previous：How to Fix Trimmer for Edge Banding: A Guide for Furniture Factories

Next：How to Manually Edge Band with a Roundover Edging with Chinese Furniture Edging Manufacturer