How to Trim Edge Banding after Application87

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, MDF, or other wood panels to give them a finished look and protect them from moisture and damage. It is typically made of wood, plastic, or metal and can be applied using a variety of adhesives or mechanical fasteners.

After edge banding has been applied, it is important to trim the excess material from the edges of the panel. This can be done using a variety of tools, including a utility knife, a flush trim saw, or a router with a flush trim bit.

Using a Utility Knife

A utility knife is a simple and inexpensive tool that can be used to trim edge banding. To use a utility knife, simply score the edge banding along the edge of the panel, being careful not to cut into the panel itself. Once the edge banding has been scored, you can snap it off by hand or use a pair of pliers to break it away.

Using a Flush Trim Saw

A flush trim saw is a power tool that can be used to trim edge banding quickly and accurately. To use a flush trim saw, simply adjust the depth of the blade to match the thickness of the edge banding and then run the saw along the edge of the panel. The saw will automatically trim the edge banding flush with the surface of the panel.

Using a Router with a Flush Trim Bit

A router with a flush trim bit can be used to trim edge banding very precisely. To use a router with a flush trim bit, simply attach the bit to the router and then adjust the depth of the bit to match the thickness of the edge banding. Next, run the router along the edge of the panel, being careful to keep the bit perpendicular to the surface of the panel. The router will trim the edge banding flush with the surface of the panel.

Tips for Trimming Edge Banding* Use a sharp blade or bit. A dull blade or bit will tear the edge banding and make it difficult to get a clean cut.
* Score the edge banding before trimming it. This will help to prevent the edge banding from chipping or splintering.
* Trim the edge banding in small increments. This will help to prevent the edge banding from breaking away from the panel.
* Be careful not to cut into the panel itself. If you do cut into the panel, you can repair it using wood filler or a similar product.

2024-12-22

Previous：How to Trim Inside Radius Edge Banding for Chinese Furniture

Next：How to Trim Edge Banding for a Perfect Finish