How to Trim Inside Radius Edge Banding for Chinese Furniture256

Edge banding is an essential component of furniture manufacturing, providing a clean and finished look to exposed edges. When working with curved surfaces, such as inside radius edges, trimming the edge banding can be a challenging task. This guide will provide step-by-step instructions on how to trim inside radius edge banding for Chinese furniture, ensuring a professional and aesthetically pleasing finish.

Materials and Tools Required:* Edge banding material
* Flush trim router
* Radius template
* Double-sided tape
* Sandpaper or sanding block
* Tack cloth
* Safety glasses

Step 1: Prepare the Edge Banding* Apply double-sided tape to the back of the edge banding material.
* Align the edge banding with the edge of the furniture component, ensuring that it is flush with the surface.
* Press down firmly to secure the edge banding in place.

Step 2: Create the Radius Template* Use a compass or radius gauge to draw an arc on a piece of scrap wood, corresponding to the desired radius of the inside curve.
* Cut out the arc using a jigsaw or scroll saw, creating a radius template.

Step 3: Set Up the Router* Mount a flush trim router bit in the router.
* Adjust the depth of cut to match the thickness of the edge banding.
* Attach the radius template to the router's baseplate using double-sided tape.

Step 4: Trim the Edge Banding* Position the router over the edge banding, aligning the cutting edge with the radius template.
* Turn on the router and slowly guide it along the curve, following the template.
* Hold the router firmly and maintain a steady hand to prevent any imperfections.

Step 5: Sand and Finish* Once the edge banding is trimmed, use sandpaper or a sanding block to smooth any rough edges.
* Remove any dust or debris using a tack cloth.
* Apply a clear finish or stain to protect and enhance the appearance of the edge banding.

Tips:* Practice on scrap material before attempting to trim edge banding on actual furniture components.
* Use a sharp router bit to ensure clean and precise cuts.
* Cut the radius template slightly larger than the desired radius to allow for small adjustments.
* Hold a piece of sacrificial wood or cardboard next to the edge banding to protect the furniture surface from any accidental router damage.
* Always wear safety glasses when using power tools.

Conclusion:By following these steps and utilizing the appropriate tools and materials, you can effectively trim inside radius edge banding for Chinese furniture, achieving a professional and visually appealing finish. Remember to practice, use caution, and maintain a high level of attention to detail for optimal results.

2024-12-22

Previous：How to Finish Edge Banding in On-Site Woodworking

Next：How to Trim Edge Banding after Application