How to Glue Wood Veneer Edge Banding138

Wood veneer edge banding is a thin strip of wood that is applied to the edges of plywood, MDF, or other substrates to create a finished look. It is a popular choice for furniture, cabinetry, and other woodworking projects because it is relatively inexpensive, easy to apply, and can be stained or painted to match any decor.

There are two main types of wood veneer edge banding: hot melt and pressure-sensitive. Hot melt edge banding is applied using a heat gun or iron to melt the adhesive on the back of the banding. Pressure-sensitive edge banding is applied by simply pressing it onto the substrate. Both types of edge banding can be used to achieve a professional-looking finish.

To apply wood veneer edge banding, you will need the following supplies:* Wood veneer edge banding
* Contact cement or wood glue
* A heat gun or iron (for hot melt edge banding only)
* A roller or J-roller
* A sharp knife
* Sandpaper

Instructions

1. Prepare the substrate. The substrate should be clean, dry, and free of any dust or debris. If the substrate is not properly prepared, the edge banding will not adhere properly.

2. Apply the adhesive. If you are using hot melt edge banding, apply a thin layer of contact cement to the back of the banding and to the edge of the substrate. If you are using pressure-sensitive edge banding, simply peel off the backing paper and apply the banding to the substrate.

3. Apply the edge banding. Starting at one end of the substrate, carefully align the edge banding with the edge of the substrate. Press the banding into place with a roller or J-roller. Be sure to apply even pressure along the entire length of the banding.

4. Trim the excess banding. Once the edge banding is in place, use a sharp knife to trim any excess banding from the ends of the substrate. Be careful not to cut into the substrate.

5. Sand the edge banding. Sand the edge banding lightly with sandpaper to smooth any rough edges and to create a finished look.

Tips* For best results, use a high-quality wood veneer edge banding.
* Be sure to apply the adhesive evenly to both the back of the banding and to the edge of the substrate.
* Press the banding into place with even pressure to ensure a strong bond.
* Trim the excess banding carefully to avoid cutting into the substrate.
* Sand the edge banding lightly to smooth any rough edges.

ConclusionWood veneer edge banding is a versatile and affordable way to add a finished look to any woodworking project. By following the instructions above, you can easily apply wood veneer edge banding to achieve a professional-looking finish.

2025-02-19

Previous：How to Cut Edge Banding Straight with a Saw

Next：How to Remove Mildew from Furniture Edging