How to Cut Edge Banding Straight with a Saw121

As a leading manufacturer of edge banding in China, we often receive inquiries from customers about the best way to cut edge banding straight. In this blog post, we will provide a step-by-step guide on how to cut edge banding straight with a saw, ensuring a precise and professional finish to your woodworking projects.

Step 1: Gather Your Tools

Before you begin, make sure you have the following tools on hand:* Table saw or miter saw
* Edge banding
* Measuring tape
* Pencil or marking tool
* Safety glasses
* Push sticks

Step 2: Measure and Mark the Edge Banding

Use a measuring tape to determine the length of edge banding you need for your project. Mark the length on the edge banding with a pencil or marking tool. Make sure the mark is perpendicular to the edge of the banding.

Step 3: Set Up Your Saw

If using a table saw, adjust the blade height to slightly higher than the thickness of the edge banding. For a miter saw, adjust the miter angle to 90 degrees. Use a sharp saw blade designed for cutting wood.

Step 4: Position the Edge Banding

Place the edge banding on the saw table or miter saw platform, aligning the marked line with the saw blade. Use push sticks to hold the edge banding securely against the fence and prevent kickback.

Step 5: Make the Cut

Slowly feed the edge banding into the saw blade, applying steady pressure. Keep the edge banding flat against the fence and maintain a firm grip on the push sticks throughout the cut.

Step 6: Remove the Trimmed Edge Banding

Once the cut is complete, carefully remove the trimmed edge banding from the saw. Inspect the cut for any imperfections or splintering.

Tips for Cutting Edge Banding Straight* Use a sharp saw blade to ensure a clean cut.
* Set the saw blade height slightly higher than the thickness of the edge banding to avoid tearing.
* Use a fence or miter gauge to guide the edge banding and ensure a straight cut.
* Always use push sticks to safely feed the edge banding into the saw.
* Practice on scrap pieces of edge banding before cutting the actual piece you need.
* Wear safety glasses to protect your eyes from flying wood chips.

2025-02-19

Previous：What You Need to Know About Edge Banding Failure: Myths vs. Facts

Next：How to Glue Wood Veneer Edge Banding